Updated: January 4, 2020 Home » Freeware and Software Reviews » Data Recovery, Backup And Cloud Storage

1. Free Software For Mac Downloads
2. Netgear Nas Software For Mac Download
3. Netgear Nas Software For Mac Download

1. Oct 23, 2019 Encryption - NAS devices that include hardware-level encryption are much faster than devices that rely on software. Encryption is mostly important if you use your NAS to back up sensitive data that you don’t want anyone to access. Even if you only access your NAS through your home network, encryption will protect you if the device is stolen.
2. Openfiler is an operating system that provides file-based network-attached storage and block-based storage area network. It was created by Xinit Systems, and is based on the rPath Linux distribution. It is free software licensed under the GNU General Public License version 2. Its software stack interfaces with open source third-party software.

The problem with a growing startups or small business is scalability when they reach a path where they are neither small nor big, too big to use public cloud storage services and too small to afford enterprise storage solutions such as Amazon Web Services. Public cloud storage services start out cheap but could become prohibitively expensive as more data is stored.

Alternative 2020 Article ➤ 9 Free Self Hosted Cloud Storage Software For Home Office

Depending on factors outside your control, performance can be unreliable, at the same time there is a high privacy and security risk involved with storing certain data on someone else’s ‘cloud’ computer unless you pay a premium for enterprise military grade encryption.

Feb 16, 2009 How to Backup a Mac using Time Machine to Netgear ReadyNAS Storage (NAS) Device VIDEO TUTORIAL - Duration: 5:21. Digital Byte Computing 4,384 views.

This is where Prosumer comes into play, it hits the sweat spot between Consumer and Professional. Storage Operating System allows you to set up your own ‘Cloud’ on your network at your own cost. Because these OS uses a desktop computer as a storage system, it doesn’t make any sense for Home Users to run it for 24/7, if you’re into creating a central network storage system for your house, get a consumer NAS Storage from WD Red, D-Link, Asus or Seagate IronWolf. Without further ado, here are some free and open-source network-attached storage (NAS) OS software for small businesses.

↓ 01 – FreeNAS [ The Best ]

Free Software For Mac Downloads

What is FreeNAS? FreeNAS is an operating system that can be installed on virtually any hardware platform to share data over a network. FreeNAS is the simplest way to create a centralized and easily accessible place for your data. Use FreeNAS with ZFS to protect, store, backup, all of your data. FreeNAS is used everywhere, for the home, small business, and the enterprise.

What is ZFS? ZFS is an enterprise-ready open source file system, RAID controller, and volume manager with unprecedented flexibility and an uncompromising commitment to data integrity. It eliminates most, if not all of the shortcomings found in legacy file systems and hardware RAID devices. Once you go ZFS, you will never want to go back.

• Encryption – FreeNAS is the first and only open source project to offer encryption on ZFS volumes! A full-volume encryption option is available during volume creation, providing industry standard AES-XTS encryption which can be hardware-accelerated (when the processor has AES-NI capability).
• Replication – ZFS Snapshots are more than just local backups – they can be used to create remote backups as well. Replicating snapshots of the filesystem to a remote ZFS filesystem creates a complete duplicate there.
• Snapshots – Thanks to ZFS, snapshots of the entire filesystem can be made and saved at any time. As long as a snapshot exists, administrators can access files as they were when the snapshot was made.
• Data Protection – ZFS is designed for data integrity from top to bottom. RAID-Z, the software RAID that is part of ZFS, offers single parity protection like RAID 5, but without the “write hole” vulnerability thanks to the copy-on-write architecture of ZFS.
• File Sharing – File sharing is what FreeNAS does best. Every major operating system is supported with SMB/CIFS (Windows file shares), NFS (Unix file shares) and AFP (Apple File Shares) as well as FTP, iSCSI (block sharing), WebDAV and other methods of sharing data over the network are available.

↓ 02 – XigmaNAS / NAS4Free

XigmaNAS / NAS4Free is an Open Source Storage NAS (Network-Attached Storage) distribution based on FreeBSD. The NAS4Free operating system can be installed on virtually any hardware platform to share computer data storage over a computer network. ‘NAS’ as in “Network-Attached Storage” and ‘4Free’ as in ‘Free and open source’, NAS4Free is the simplest and fastest way to create a centralized and easily-accessible server for all kinds of data easily accessed with all kinds of network protocols and from any network.

NAS4Free supports sharing across Windows, Apple, and UNIX-like systems. It includes ZFS v5000 , Software RAID (0,1,5), disk encryption, S.M.A.R.T / email reports etc. with the following protocols: CIFS/SMB (Samba), Active Directory Domain Controller (Samba), FTP, NFS, TFTP, AFP, RSYNC, Unison, iSCSI (initiator and target), HAST, CARP, Bridge, UPnP, and Bittorent which is all highly configurable by its WEB interface. NAS4Free can be installed on Compact Flash/USB/SSD key, Hard disk or booted from a LiveCD/LiveUSB with a small usbkey for config storage.

The same principles apply to any app you need to launch with startup parameters.The process is as follows:. I’ll also explain how to wrap up such a command into your own app and add an icon to it, so that you can launch it from the dock with a single click.This can be useful if you need to convince Google Chrome or any other app to launch with certain parameters and modify its behaviour somehow. In my example I’m using Blender, and I’m using a startup parameter to change its default render engine upon launch. In this episode I’ll show you how to launch a Mac App from the Command Line, so that we can pass parameters.

• BitTorrent client (Transmission)
• iTunes/DAAP server (Firefly)
• Network Bandwidth measure tool (iPerf3)
• RRDtool
• UPnP server (fuppes)
• UPnp server (MiniDLNA)
• Webserver (lighttpd)

↓ 03 – OpenMediaVault

openmediavault is the next generation network attached storage (NAS) solution based on Debian Linux. It contains services like SSH, (S)FTP, SMB/CIFS, DAAP media server, RSync, BitTorrent client and many more. Thanks to the modular design of the framework it can be enhanced via plugins.

openmediavault is primarily designed to be used in small offices or home offices, but is not limited to those scenarios. It is a simple and easy to use out-of-the-box solution that will allow everyone to install and administrate a Network Attached Storage without deeper knowledge.

• Debian Linux OS with Web based administration
• Volume management and S.M.A.R.T.
• Link aggregation
• Wake On Lan
• IPv6 support
• Email notifications
• File sharing

↓ 04 – Openfiler

Openfiler converts an industry standard x86_64 architecture system into a full-fledged NAS/SAN appliance or IP storage gateway and provides storage administrators with a powerful tool to cope with burgeoning storage needs. Openfiler ensures that storage administrators are able to make the best use of system performance and storage capacity resources when allocating and managing storage in a multi-platform network.

Openfiler provides key features such as iSCSI target for virtualization, Fibre Channel target support, block level replication and High Availabilty that are the mainstay of any business critical storage environment. Openfiler addresses all the key data storage concerns:

• Reliability – Openfiler supports both software and hardware RAID with monitoring and alert facilities; volume snapshot and recovery
• Availability – Openfiler supports active/passive high availability clustering, MPIO, and block level replication
• Performance – Linux 2.6 kernel supports the latest CPU, networking and storage hardware
• Scalability – filesystem scalability to 60TB+, online filesystem and volume growth support

↓ 05- Rockstor

Build and manage your own Linux & BTRFS powered advanced NAS and Cloud storage with ease. Rockstor Small and Midsize Business (SMB) Cloud Server is the recommended solution for organizations with several hundred Terabytes of capacity requirement. Your organization may rely on expensive public cloud storage and also store a lot of data locally causing you to switch between local and cloud and ultimately resulting in inefficiency and loss of productivity. With Rockstor as your Cloud Server, works great on Microsoft’s Windows 10 and Apple’s macOS.

• Build your Private Cloud Storage and empower your organization with a hybrid workflow leveraging the best of both public and private cloud storage
• Seamlessly integrate with public cloud storage resulting in efficiency and lower operating cost
• Scale your storage needs with low incremental cost
• Manage your storage with little to no IT experience

↓ 06 – PetaSAN

PetaSAN is an open source Scale-Out SAN solution offering massive scalability and performance. PetaSAN uses modern cloud based technologies to provide the elasticity and agility to scale up the storage cluster simply by adding more nodes, this can be done at any time and in a truly non-disruptive manner.

PetaSAN is designed from the ground up to do one thing: provide highly available clustered iSCSI disks. In PetaSAN, an iSCSI disk can have many access paths, each identified by its virtual IP address. These IP addresses are clustered across several storage nodes.

↓ 07 – ESOS – Enterprise Storage OS

Enterprise Storage OS is a quasi Linux distribution based on the excellent SCST project; its purpose is to provide SCSI targets via a compatible SAN (Fibre Channel, InfiniBand, iSCSI, FCoE). In a nutshell, ESOS® can easily turn a server with the appropriate hardware into a disk array that sits on your enterprise Storage Area Network (SAN) providing sharable block-level storage volumes.

Typical uses for an ESOS® “storage server” include VMFS datastores on VMware ESX/ESXi, Windows NTFS volumes, Linux disks, etc. A high performance, purpose-built (appliance like) Linux base built from scratch, with no relation to other Linux distributions.

• ESOS is memory resident — it boots off a USB flash drive, and everything is loaded into RAM. If the USB flash drive fails, ESOS® will send an alert email, and you can simply build a new ESOS® USB flash drive, then replace the failed drive and sync the configuration.
• Kernel crash dump capture support. If the ESOS® Linux kernel happens to panic, the system will reboot into a crash dump kernel, capture the /proc/vmcore file to the esos_logs file system, and finally reboot back into the production ESOS® kernel — all automatically. ESOS® sends an email alert on system start-up and checks for any crash dumps.
• Two operating modes: Production (default) & Debug. With “Production” mode, the performance version of SCST (make 2perf) is used. If you find you’re having a problem and not getting sufficient diagnostic logs, simply reboot into “Debug” mode (full SCST debug build, make 2debug) and get additional log data.
• Enterprise RAID controller CLI configuration tools. Popular RAID controller CLI tools are an optional install with ESOS® (eg, LSI MegaRAID, Adaptec AACRAID, etc.) which allows configuration (add/delete/modify) of volumes / logical drives from a running ESOS® system.
• ESOS® is compatible with most popular enterprise RAID controllers and Tier-1 server hardware. It currently supports the following front-end target types: Fibre Channel, iSCSI, InfiniBand (SRP), Fibre Channel over Ethernet (FCoE)
• A text-based user interface (TUI) that provides an easy to use interface with convenient storage provisioning functions; see how it looks on the 02_Screenshots wiki page.
• Clustering / high availability (HA) components: Pacemaker + Corosync + DRBD
• Create advanced back-end storage block device configurations using Linux software RAID (md) and Logical Volume Manager (LVM2).
• Create virtual tape libraries (disk based) that can be used on your Storage Area Network (SAN). Works with popular software solutions such as Symantec NetBackup, Symantec BackupExec, EMC/Legato NetWorker, Bakbone Netvault, Tivoli Storage Manager (TSM), and Bacula. Support for VTLs in ESOS® is made possible via the mhVTL project.
• Inline data de-duplication using lessfs; includes support for encryption and compression using QuickLZ, Google’s Snappy, or LZO.
• Support for Linux Ethernet bridging and NIC bonding (EtherChannel).
• Software-based block layer cache solutions: bcache, dm-cache/lvmcache, and EnhanceIO.
• Tiered storage devices with automatic migration and “smart” placement of data chunks via the BTIER project.
• Support for using Ceph RBD images as back-end storage devices.
• Advanced Fibre Channel over Ethernet (FCoE) support: ESOS® includes the fcst “software” FCoE target driver, and has the ability (build options) to support Emulex OCS FCoE CNA / Chelsio Uwire FCoE CNA hardware targets.
• The advanced ZFS storage subsystem is supported as a build option (via the ZFS on Linux project).

↓ 08 – CryptoNAS

The CryptoNAS project brings data encryption to the masses. The CryptoNAS live-CD is made for people who want to encrypt their data without bothering about complicated technical issues. A computer running the CryptoNAS live-CD works as a fileserver (NAS) that encrypts your private data. The CryptoNAS-Server package adds a user friendly, web-based frontend for harddisk encryption to an existing fileserver.

But if you're an experienced user, just click the drop-down arrow on the Recover button to select the specific scan method you desire. If your memory card is formatted with an HFS+, FAT or NTFS file system, you can use Quick Scan to try and locate deleted files based on the data in your file system tables.

This article is about how to get your large files off your main computer hard drive and onto some external network storage that is more reliable, longer-term, and doesn’t take up precious space on your laptop or desktop computer. Apple don’t make an external storage solution but I found Synology have some great devices.

Netgear Nas Software For Mac Download

I upgrade my Mac computer about every 3 years. Each time I do it’s a bit like moving house -Â lots of stuff moves with me that I probably don’t need but I’m not ready to throw it out yet.

I just purchased a new Mac mini,  but the particular SSD that Apple chose to use in the Mac mini is very expensive.  A 1 TB hard disk on a new Mac Mini costs an extra $1280. That’s a lot to pay for an SSD just for storing files. To make matters worse you cannot upgrade the SSD drives in the new Mac Mini.Â

Enter the NAS?

Many businesses have a different approach to storage, Â they use what is called network attached storage (NAS). Â This is an external hard drive that sits outside of your computer and is accessed over the network. It’s a bit like an external thumb drive but it’s on the network so it’s always available from any computer. If you upgrade your computer you don’t have to transfer the data across, Â it will still be on your NAS.Â

Netgear Nas Software For Mac Download

NAS storage is that it is much slower than a hard drive. Think of it as being more like a filing cabinet or bookcase. Â It’s primary role is STORAGE and sharing with other computer.Â

With the purchase of my new Mac Mini I’ve decided it’s a good time to transfer the bulk of my data over to a network attached storage device.

Here’s what I purchased:

1. A Synology DiskStation DS218j – NAS box AU$247

This is the external box that will hold my hard drives and attach them to the network. This particular box has two hard drives in it. Exactly the same data is on each hard disk so that f one of the hard disks fails I don’t lose my data. You can get a 4 drive system that is faster and more secure, but 2 was plenty for me.

I could have also gone with Qnap or another brand, but I picked Synology after doing some research on what works well with a Mac computer.

2. Two Seagate 4TB Iron Wolf drives AU$157 each

It seems like the sweet spot for robust but affordable drives for NAS storage are the Seagate Ironwolf Pro or Western Digital RED NAS. You can spend a lot more, These are in the middle price range yet are more reliable than the standard consumer drive.Â

I went with Ironwolf because they supposedly work better with the Synology NAS. I chose 4TB drives because that seemed to be the sweet point at the moment in terms of TB per dollar. The two hard drives are in parallel so 2x  4TB drives still only give me 4TB in total.Â

3. A BR700ELCD CyberPower UPS AU$139

The icing on the cake was to buy an uninterruptible power supply (UPS). If our power fails this little device signals to the NAS to shutdown and supplies it with power for 30 seconds while it shuts down.

This shopping spree set me back AU$700 in total, but this is a lot less than the $1280 for 1TB on the Mac Mini. Plus I now have 4TB of storage not 1TB. It’s now external to my computer,  so I can easily access it from other computers in the home, which means all my computers can have a smaller SSD in them. I can use it for Time MAchine backups of my main hard disk. Plus I won’t need to transfer data across from it should I upgrade my computer in the future.

Setting it all up.

I don’t want to describe in detail how to set it up, the instructions are pretty self-explanatory. But here’s a few a tips…

• You have no control over what the Synology hard drives are called, so don’t try changing the name. They are called home, video, music, and photo. So the NAS will eventually look like a series of separate mounted drives like this:

• It’s not like a normal hard drive where you plug it in and it mounts on your desktop. The NAS is set up like a computer and it will have an IP address that you log in to through your web browser. (eg 10.0.0.120).

• Before you use the NAS you need to log in and create a user. You can then choose drives that will be available for that user. (eg photo etc). You can choose to make all the drives available (like in the screenshot above) or just 1 or more of the drives.
• To mount the NAS and see it on your desktop you need to use the ‘Go’ menu in your OSX Menu Bar and select ‘Connect to Server.’ Type in afp:// followed by the IP address of the NAS. eg afp://10.0.0.120Â
• When you log in as a user it will mount your own home folder, but not other people’s home folders. If you log in as a different user you will see a different home folder. The NAS looks different depending on who you have logged in as. But ‘shared’ folders appear the same to everyone.
• You can backup to the NAS. If you want to back up using Time Machine you need to create a completely separate user (I called my user ‘Time Machine’). This is because you want your regular user to have access to the entire 4TB of the hard drive, but you need to limit the amount of space available to Time Machine (1g 1.5TB) otherwise Time Machine will just keep on backing up to the NAS until it is completely full!
• When you tell Apple Time Machine to back up to the NAS it will automatically create a sparse-bundle in the NAS folder and put the Time Machine backup there. There are many articles on the web telling you that you need to use Apple’s disk utility to manually create a sparse image but these are wrong. Time Machine does this automatically for you. At least it did for me in OS X Mojave.
•  Once you can see all the NAS hard drive folders on your computer, you will probably want to make them mount automatically each time you reboot your computer. To do this simply go to system preferences, login items, and drag the hard drive across.

• You’ll need to work out what you want to store on the NAS, and what you want on your computer. I’m still working this out, and the built-in Apple apps DO NOTÂ play nicely with an NAS. They like to have everything in your user folder.
• It won’t really work to put your entire user folder onto the NAS because that will slow things down too much. Plus you want your computer to be able to boot properly when the NAS is not available so you don’t want any files that your computer to depends (eg the user folder) on stored on the NAS.
• I decided to manually move my large files. This turned out to be my Photo library (hard), iTunes (easy), and movies (easy).
• It’s complicated to put your Apple photo library onto a shared NAS. Apple say not to do it. It needs to be on an OSX Extended journaled Volume or APFS. You can put it on an OSX Extended Journaled sparse bundle disk image. Â This was giving me problems so I’ve put my Apple photos library back on my SSD drive.
• It’s easy to put your iTunes movies onto the NAS. Just move it across and point the iTunes folder there from iTunes preferences.
• I’ve moves all my movies across except for the iMovie folder.Â